FE80 C/C Composite Furnace Trays & Baskets
```html
- Designed for High-Temperature Furnace Loading: FE80 C/C composite furnace trays and baskets are made for heat treatment, sintering, brazing, powder metallurgy and vacuum furnace applications where stable support, reduced fixture weight and reliable high-temperature performance are required.
- Custom Basket and Tray Structures: C/C composite baskets, trays, support frames, boats and loading fixtures can be customized according to workpiece size, furnace chamber space, loading method, total batch weight and drawing requirements.
- CCC Sheet and C/C Composite Sheet Options: For customers who need material sheets before machining or assembly, CCC sheets and C/C composite sheets can be discussed according to thickness, available dimensions, MOQ, cutting requirements and final furnace application.
- Suitable for Demanding Furnace Conditions: Carbon-carbon composite parts offer low weight, good strength-to-weight ratio and dimensional stability under suitable high-temperature furnace conditions. Material grade and structure should be selected according to temperature, atmosphere, load and service requirements.
- Drawing-Based Customization and MOQ Support: SHJ-CARBON supports custom carbon-carbon composite parts based on CAD drawings, sketches, sample photos or old part dimensions. Please send the required size, quantity, working temperature and furnace atmosphere to confirm available dimensions and MOQ.
Description
FE80 C/C Composite Furnace Trays, Baskets and Custom Carbon-Carbon Parts
SHJ-CARBON supplies FE80 C/C composite furnace trays, baskets, sintering plates, boats, support parts and custom carbon-carbon composite components for heat treatment, sintering, brazing, powder metallurgy and vacuum furnace applications. The structure, size, MOQ and material grade can be discussed according to your drawing, workpiece size, furnace atmosphere and working temperature.
For furnace users and equipment manufacturers, a C/C composite basket is not selected by material name alone. The basket structure should match the loading weight, part arrangement, furnace chamber size, support method and thermal process. If you also need CCC sheet or C/C composite sheet for machining, please provide thickness, available dimensions and quantity requirements for review.
Send your drawing, sample photo, required dimensions, MOQ request, working temperature and furnace atmosphere. Our team can help check whether a C/C composite tray, basket, sheet or custom part is suitable for your application.
C/C Composite Baskets for Furnace Loading
C/C composite baskets are used for loading, spacing and supporting parts during high-temperature furnace processes. Compared with many metal basket structures, carbon-carbon composite baskets can reduce fixture weight and improve dimensional stability under suitable furnace conditions.
The final basket design depends on the parts being processed. Small parts may need an open basket or tray basket. Heavy workpieces may require a reinforced support structure. Some applications need C/C sheets, plates or machined components to be assembled into a custom furnace basket.
Common requirements include:
- C/C composite basket for vacuum furnace loading
- Carbon-carbon composite trays for heat treatment
- Custom furnace basket structure based on drawing
- CCC sheet or C/C composite sheet for machined parts
- Available dimensions and MOQ confirmed by application
Basket Structure, Available Size and MOQ
Most C/C composite basket inquiries start with structure and dimensions. Please provide the basket type, workpiece size, loading weight, furnace chamber space and quantity. If you are still in the design stage, a simple sketch or old basket photo can also help us understand the application.
| Basket Information | What to Confirm |
| Basket Type | Open basket, tray basket, support frame, assembled basket or custom fixture |
| Workpiece Size | Length, width, height, shape and loading arrangement |
| Load Weight | Single part weight and total batch loading weight |
| Furnace Type | Vacuum furnace, sintering furnace, brazing furnace, heat treatment furnace |
| Working Temperature | Normal operating temperature and peak temperature |
| Furnace Atmosphere | Vacuum, inert gas, protective atmosphere or other process condition |
| MOQ | Confirmed according to size, structure, material grade and machining complexity |
| Drawing | CAD drawing, sketch, sample photo or old basket dimensions |
Ask MOQ and available dimensions before ordering. For custom C/C composite baskets, drawing confirmation is recommended before quotation.
C/C Composite Trays, Sheets and Custom Furnace Parts
Besides furnace baskets, SHJ-CARBON can also discuss C/C composite trays, CCC sheets, C/C composite sheets, sintering plates, boats, spacers, support plates and machined carbon-carbon composite parts. These parts are often used together in furnace loading systems and hot zone structures.
| Product Type | Typical Use | Information Needed |
| C/C Composite Trays | Flat loading support for heat treatment or sintering parts | Length, width, thickness, load weight and quantity |
| C/C Composite Baskets | Batch loading, spacing and supporting workpieces | Basket structure, workpiece size, total loading weight and drawing |
| CCC Sheet / C/C Composite Sheet | Material sheet for further cutting or machining | Thickness, available dimensions, MOQ and cutting requirement |
| Sintering Plates and Boats | Powder metallurgy, ceramic processing and furnace support | Plate size, flatness need, temperature and atmosphere |
| Custom Carbon-Carbon Parts | Spacers, supports, holders, base plates and special furnace parts | Drawing, sample photo, machining details and application |
If your project starts from C/C composite sheet or plate material, please provide the required sheet dimensions and quantity first. If your project is a finished basket or tray, please send the assembled structure or old part dimensions.
Recommended Specifications
FE80 and C/C Composite Material Options for Furnace Trays and Baskets
The material grade should be selected according to furnace temperature, atmosphere, basket structure, loading weight and expected service conditions. FE80 is often discussed for furnace trays, baskets and support parts that need high-temperature performance and stable structure. The values below are typical reference values for standard products.
| Grade | Bulk Density | Flexural Strength |
Young's Modulus |
Interlaminar Shear Strength |
Compressive Strength |
Electrical Resistivity |
Temperature Rating |
| FE-80 [Short fiber] |
1.65g/cm³ | 200MPa | 45GPa | 18MPa | 120MPa | 20μΩ·m | 2000℃ |
| FE-12 [Long fiber] |
1.2g/cm³ | 120MPa | 40GPa | 10MPa | 100MPa | 15~40μΩ·m | 2000℃ |
| FE-14 [Long fiber] |
1.4g/cm³ | 120MPa | 40GPa | 10MPa | 100MPa | 15~40μΩ·m | 2000℃ |
| FE-25 [Long fiber] |
1.5g/cm³ | 150MPa | 30GPa | 12MPa | 140MPa | 15~30μΩ·m | 2000℃ |
*The parameters in this table are for standard products. If high-purity products are required, purification treatment can be provided, with purified ash content of ≤5 PPM maximum.
*The above values are typical values, not guaranteed values. Final material selection should be confirmed according to basket structure, tray size, loading weight and furnace conditions.
*Special sizes, sheet dimensions, basket structures and high-end C/C composite parts can be customized after technical discussion.
Applications of C/C Composite Furnace Trays and Baskets
C/C composite trays and baskets are used when furnace loading parts need to work under high temperature, repeated thermal cycles and controlled atmosphere. The application should be checked before confirming material grade, structure and available dimensions.
| Application | Typical Product | Key Concern |
| Heat Treatment | C/C trays, baskets and loading supports | Fixture weight, deformation, cycle stability and loading efficiency |
| Sintering | Sintering plates, boats, supports and spacers | Flatness, dimensional stability, temperature and atmosphere |
| Brazing | Brazing supports, trays and positioning parts | Workpiece alignment, clean atmosphere and high-temperature stability |
| Powder Metallurgy | Batch baskets, trays, plates and boats | Batch loading, support strength and repeated furnace cycles |
| Vacuum Furnace | C/C composite trays, baskets, sheets and support parts | Material compatibility, structure, load and hot zone space |
Available Dimensions, MOQ and Drawing Customization
To confirm available dimensions and MOQ, please send the product type and application first. A C/C composite sheet inquiry is different from a finished basket inquiry. Sheet quotation focuses on thickness, length, width and quantity. Basket quotation also needs structure, assembly method, loading weight and workpiece arrangement.
| Inquiry Item | What We Need |
| Product Type | Basket, tray, sheet, plate, boat, support part or custom component |
| Size | Length, width, height, thickness, diameter or assembled structure |
| Quantity / MOQ | Required quantity for each size or expected MOQ range |
| Drawing | CAD drawing, sketch, sample photo or old part dimensions |
| Temperature | Working temperature and peak temperature |
| Atmosphere | Vacuum, inert gas, protective gas or carburizing atmosphere |
| Application | Heat treatment, sintering, brazing, powder metallurgy or furnace loading |
| Machining | Cutting, drilling, slotting, assembling or special shape |
Ask MOQ and available dimensions for C/C composite baskets, trays and CCC sheets. For custom carbon-carbon parts, please attach drawings whenever possible.
Why Work With SHJ-CARBON
C/C Composite Furnace Part Support
Material selection, structure discussion and drawing-based customization for high-temperature furnace users.
SHJ-CARBON supports customers who need C/C composite furnace trays, baskets, sheets and custom carbon-carbon parts. Before quoting, we check the actual furnace condition and part structure instead of recommending a material only by name.
Application-Based Material Selection
Material grade is discussed according to temperature, atmosphere, load weight and service condition.
01
Basket and Tray Structure Review
For baskets, trays and furnace loading supports, structure and support span should be checked together with material grade.
02
CCC Sheet and Plate Discussion
For customers who need C/C composite sheet or plate material, we can discuss available dimensions, thickness, MOQ and cut-to-size needs.
03
Drawing-Based Custom Manufacturing
Custom trays, baskets, boats, spacers and support parts can be discussed according to drawings, samples or old part photos.
04
Product Key Technologies
Process Compatibility
FE80 C/C composite trays, baskets and custom furnace parts can be discussed for:
- Vacuum heat treatment
- Sintering and powder metallurgy
- High-temperature brazing
- Furnace loading and support structures
- Custom CCC sheet and machined C/C composite parts
Before production, we recommend confirming the application temperature, atmosphere, loading weight and drawing details.
Ask MOQ and Available Dimensions
For a faster quotation, please send the product type and size list first. If you need a C/C composite basket, include structure and loading information. If you need CCC sheet, include thickness, length, width and quantity.
Useful information includes:
- Basket, tray, sheet or custom part type
- Available dimensions or required dimensions
- MOQ or target order quantity
- Working temperature and furnace atmosphere
- Drawing, sketch, sample photo or old part dimensions
Contact SHJ-CARBON to request C/C composite furnace baskets, trays, CCC sheets and custom carbon-carbon composite parts.
FAQ About C/C Composite Baskets and CCC Sheets
What are C/C composite baskets used for?
C/C composite baskets are used for loading, spacing and supporting parts in heat treatment, sintering, brazing, powder metallurgy and vacuum furnace processes.
Can C/C composite baskets be customized?
Yes. Basket structure, size, support method and assembly details can be discussed according to drawings, workpiece size, loading weight and furnace conditions.
What information is needed to quote a carbon-carbon composite basket?
Please provide the basket drawing or sample photo, overall size, workpiece size, total loading weight, working temperature, furnace atmosphere and required quantity.
Can you supply CCC sheet or C/C composite sheet?
C/C composite sheet or CCC sheet can be discussed according to thickness, available dimensions, MOQ, cutting requirement and final application.
How is MOQ confirmed?
MOQ depends on product type, size, structure, material grade, machining complexity and production plan. Please send the required dimensions and quantity for confirmation.
Can FE80 C/C composite parts be used in vacuum furnaces?
FE80 C/C composite furnace trays, baskets and support parts can be discussed for vacuum furnace and high-temperature applications. Final selection should be based on temperature, atmosphere, load and fixture structure.
Can you manufacture according to drawings?
Yes. Custom C/C composite trays, baskets, sheets, plates, spacers and furnace parts can be discussed according to CAD drawings, sketches, samples or old part photos.
```
Hot Tags: FE80 C/C Composite Furnace Trays & Baskets, China, suppliers, manufacturers, factory, buy, price, for sale, free sample, Graphite Products, Isostatic Graphite, graphite for heat exchanger, artificial graphite block, Graphite block for mold, CIP graphite block
